Monday, January 25, 2016

Anodizing Tips: Nitric Acid

   Nitric Acid is used in anodizing to remove heavy metals. Most notably Copper and Zinc but more so copper. Aluminum always has different elements alloyed with it to give strength and in anodizing we do not want these contaminants.
     Anodized metals that are alloyed with copper give a great anodize and also gives a hard glossy shell like appearance if done properly. The problem is too much copper is usually left after phosphoric de-smut. Too much copper left can give black streaks and spots. The parts to the right have copper content (Not the 6061). Note the glossy finish but no blackening on the gold part. The 7075 parts feel slick to the touch. this is assisted by a 10% nitric acid dip for about 5 minutes, followed by a hot water blast and re-dip. The hot water helps wash the surface.
    Nitric Acid is the only acid that will aggressively attack copper and the noble metals. It's not so aggressive on aluminum so can give a shine boost if done properly. It will also aggressively attack eyes, skin and clothes much worse that sulfuric. It also fumes badly if heated and is a requirement in brite dip. The fumes on reaction with copper is strong and produces Nitrogen Dioxide or Mustard Gas...not good. For this reason we only sell reduced to 35% and has to be shipped surface hazard material. At this level it wont fume out and greatly reduces risk.
    

Wednesday, January 13, 2016

Precision Billet Jockey Wheels

Precision Billet jockey wheels new for 2016.
These will fit vintage Proshift / Precision Billet / Paul and most other derailleurs including Shimano. These are all made in Canada and anodized in house. These have a metal shielded ball bearing for easier spinning.
ID is for 5mm bolts.
Total width including caps is 8mm.
Gold side caps only.
8 grams per pulley.
Currently for sale on Toronto Cycles website and will be added to Precision Billet site shortly.

Saturday, January 2, 2016

Anodizing Tips: Setup Parameters

I've been asked many times about the basic parameters for type 2 anodizing. below I will list the voltages, temperatures and basic information that I use for anodizing. This tip page does not include dyes, dyes and de-smut will be a later topic).
   
Green AEN
Term used: Dissolution = When the acid eats back the anodized coating faster than the end current can produce.

Jet Black Anodizing
    Voltage: I run at 14.2 to 14.8 volts. This can vary a bit depending on the acid strength and tank temperature. Warmer tank = lower voltage. If the voltage is too high the parts will start to burn. If the parts burn at 14.0 volts then the acid is too strong. If the acid is too strong than pitting (Severe burning) will occur.
    Amps: Amps will self regulate. Amps must fall during the process. Amps will fall fastest at first then slow down. The final value to dissolution will be about 70 - 75% of the starting amps after 5 minutes). In other words if the starting amps after 5 minutes is 2.0 then will be anodized fully at 1.4 to 1.5 amps.
    Time: I go 1 hour 10 minutes. I go less on silver. Going longer time will hit dissolution. Really it's only necessary to go as much time as needed to take full dye and no burning.
Hot Pink
    Temperature: 70 degrees. Some dye wont take with cooler tanks (Grey BL, Pink, Reds I've had issues with cooler tanks). Warmer tank = lower voltage.
    Agitation: I use a wave maker. I don't like the bubble method but some feel is ok.
    Acid: Sulfuric acid at a 10-15% ratio. There is a 720 rule or formula but I don't use it. Really complicated and how to find the surface area of a bolt? Change the bolt and new formula...hmmm. Most rookies start with way too strong acid bath. I use a hydrometer value of 1.4 baume.
    This step is the hardest to get. My advice is a 10% bath and follow the above values. If it's too weak add a bit of acid. Remember its much easier to add acid then the split the tank to reduce.
     New acid tanks can burn parts easier. Adding some aluminum matures the tank and helps resist burn. I add phosphoric and oxalic acid in very small amounts but isn't needed. This can help burn and black tracks. Clean Tanks are very important...I will follow up on this later.
We have more tips and sell supply on www.anodizeworld.com

Thursday, December 24, 2015

Merry Christmas / Website DNS

    Wishing everyone a Merry Christmas and Happy New Year!
    We have new items coming into 2016. CNC Toy and r/c car parts will be produced, A new website (probably www.titaniumautobolts or www.titaniumboltz.com) will be opened to help with the titanium bolt end of the business and some new local services like bead blasting and welding will also be done in the shop.
    The website DNS servers are down for Christmas and the website might be offline for a day or so until resolved. This is from the server end and is a global server problem. Since it's Christmas it might take more time to resolve. Sorry about this, please check back.

Monday, December 21, 2015

Precision Billet MTB Levers!

 
    Just completed anodizing on some of the new levers for 2016. These retro type levers are heavy duty and are made for twist grip type shifters. 10mm adjuster for impact resistance, also ava. in titanium.
    Hardware is titanium and aluminum. fits standard bars. These will be posted on the PrecisionBillet.com website shortly.

Wednesday, December 9, 2015

Anodizing Tips: Effects of Alloys on Aluminum

Below is a basic chart on how various metals react with aluminum in anodizing.
This is accurate based upon our results.

Iron Reduces the brightness even in small amounts. Its addition to pure aluminum leads to dark grey or black streaks, especially when high iron to silicon ratio
Silicon At 5% level alloys, dark grey or black tones are obtained.
Copper Up to 2% can give alloys with a clear protective coating. At higher level, anodizing becomes more difficult and the coating is softer and with less protective value
Chromium At 0.3% leads to coatings which are yellow in color.
Titanium Reduces the brightness, as iron, but is added to produce finer grains
Magnesium Can give clear colorless coatings up to 3%, because magnesium oxide has a reflective index (1.736) very near to that of aluminum (1.69)
Manganese Up to 1%  may anodize to clear silver, grey brown or mottled according to production process and particles size of the constituents. With thicker anodic films, manganese contents of 0.3-0-0.5% give quite brown anodic oxide coatings on all the alloys.

Saturday, November 21, 2015

EdgeCNC.com vs. PrecisionBillet.com

Edge Engineering Inc.  Vs. PrecisionBillet.com. 
    Mr. Gary Hickman, on the behalf of Edge Engineering Inc. has come forward claiming past ownership from 2007 from a dissolved corporation. I will be posting a page on this blog to store information of this and all claims to this website domain. In my opinion this is an elaborate corporation scam. We will leave this open for comments on this blog and Facebook.
    This is not the first company to lay claim onto this domain over the past 3 years and has caused significant damage to our small business. In this article I will discuss EdgeCNC. In the future I will discuss the .co conflict, some customers have mentioned. Email Correspondence and Government searches will also be posted on a page in our blog for future references. I'm tired of constantly doing searches, sending to people and nothing in response or rude attacks.
    The claim Edge is making is very broad and is claiming full entitlement to all things relating to 3+ companies it seems, none of which shows he owns any trademarks, corporations, patents, copyrights. Currently he has hired a Lawyer to keep up the pressure on the behalf of a dissolved corporation. Click the page link to the left for eMail chain and documents....some good business tips too!
    Lets' legally consider this and assume for argument he has a claim and owned the corporation. The main problem happens legally is the corporation is dissolved. Dissolved means finished, done, cannot attack, cannot defend, no more. Before I used this name I did a sweeping search and saw this corporation was dissolved. The domain was purchased, no trademarks, patents or copyrights were found so were good to go. One could argue to get the permission of the past owner, however this is not possible since the past owner is a dissolved corporation and does not exist. This must be clearly public to avoid confusion and scams and is covered by corporation laws. If the name Precision Billet was held by this corporation it cannot sue as it does not exist in a legal capacity to move to court. Corporations are their own separate legal entity and a private person cannot sue on the behalf of a corporation. My guess is a corporation costs money in filings and this company was too cheap to pay or was hoping for a future scam as in this case. Myspace was created from a disbanded corporation and website.
   The scam part is where one opens a corporation or business, dissolves that business and releases necessary business requirements to the public domain. Normally the dissolution occurs from bankruptcy, failure to pay taxes or fees, lawsuits or poor overall business. The person bounces around into other names and dissolves. As soon as a party uses but most importantly makes the name valuable (Such as we have by running a good business) the scammer pops up claiming this and try to seize or sue. The scammer will never respond to legit questions and only threaten with lawyers. The scammer will not provide documents or any proof as in this case, legal or not. There are clear corporate laws against this practice.
    Another reason I can see is based upon past attacks to obtain the domain name. A company choose to use the .co extension many years after our domain was in use and now thinks this is a bad idea. After I refused a lowball offer or $250.00 for the domain the attacks started up.  Of course the company doesn't directly attack so this is only an educated guess. 
     Let it be clear that we purchased www.precisionbillet.com about 8 years ago and has been in full use since that time. After many hours of research I see nor have ever seen trademarks, patents, active corporations, proof of past ownership nor any legal basis to make claims against this domain name. All searched have resulted in nothing at all or dropped. We have all proper paperwork and proof of legal ownership. A bit of research would show this. Perhaps other companies want this name since we make some of the best cnc parts in the world and we have been highly recognized for our replacement parts and aluminum anodizing.
    All future claims and communication will be posted publicly so we don't need to remain anonymous. I have heard about this several times publicly so hopefully this will clear the waters. Claims have also been laid out onto other companies and they should have notice for the coming business attacks.

    I will keep this open for discussion on Facebook and the Blog...have any ideas on this? Comments? Let us know!

Wednesday, November 4, 2015

Anodizing Tip: Black Tracking in Anodized Aluminum

      Anodizing is prone to certain issues especially with lighter colors. One of the key problems is black tracking on parts especially when the aluminum contains copper (7000 series). Below I posted a photo of a gold derailleur I did last week, 7,000 series aluminum. 
I was able to virtually eliminate the tracking issue by dipping in a weak solution of nitric, rinsing with a strong blast of hot water and repeating a few times.
In addition I remove cathodes after every run and use desmut to clean all traces of copper from the tank.
Nitric is about the only acid that will attack copper and this is a major cause of black streaks
.

Saturday, October 17, 2015

Far and Near Bicycle Products

Far and Near at Toronto Cycles.
We now have Brake hoods, Lock rings, Mount brackets, Chain Ring Cogs, Skewers, Valve Stem Caps and many more items at www.torontocycles.com





Wednesday, September 16, 2015

Anodized Titanium Bolts Customer Photos

Anodized Titanium Bolts and Aluminum bolts purchased by a Customer. He also used the AEST magnesium pedals and other small parts purchased here.