Saturday, November 19, 2016

Anodizing Aluminum - Writing a Book!

    I have been writing a book on Aluminum Anodizing. Since we have been selling supply the questions have been pouring in. Release should be in Mid-December.
    This will contain lots of information into the process and is designed to not be over technical. Will relate to constant voltage and aesthetic anodizing.
www.anodizeworld.com

Saturday, August 6, 2016

Titanium Camping Gear

Vargo Titanium Camping gear.
Here are some new items we now have in stock.

 




Saturday, July 23, 2016

Anodizing for Audio Sensibility

    Some anodizing I did for the faceplate of the new Audio Sensibility speakers!
This is a solid slab of 6061 aluminum. This was polished to a mirror finish then anodized using a special process I have to keep maximum shine in black.
    These guys  also upgraded some speakers that I mentioned in an earlier post.
Sounds amazing!
     Check out their website...well known for the best audio cables:
http://audiosensibility.com

Thursday, May 12, 2016

Precision Billet Brake Levers and Crank Bolts

    Precision Billet brake levers are now complete.
These are logo free and can be purchased at www.torontocycles.com and will be soon updated at www.precisionbillet.com. We will be doing some custom anodizing, splash and streak. Soon we should have custom laser engraving but might be a few months away.
    Titanium crank bolts with press on collars will be done shortly: photo below.


Tuesday, March 22, 2016

Anodizing Mirror Polish

Just some pics of mirror I did on the black part in the center. Reflection is some parts and a bike hanging from the ceiling. The purple on the left is overcast with black (not polished) and looks black at discrete angles. I'll follow up sometime about polishing aluminum. Mirror anodizing is a slightly different technique.

Friday, March 11, 2016

Precision Billet Purple Derailleur Mounted

This is a Purple precision Billet rear derailleur mounted. Pics from a customer "Robert", we did some custom anodizing for him on this.
 
 

Tuesday, March 8, 2016

Anodizing Tips: Silver

    Silver is very easy to anodize since there is no color added. The base finish, like all anodizing will have a large result on the finish. I like polished as much as possible. If you have a mirror finish the anodizing will tend to pull the grains out of the mirror finish but should reflect really well. Blasted or etched will look whiter. The photo isn't that great (hard to take pics of silver) but you can see the reflection of the black pipes in the part.
    A few little tricks: I do short anodizing time, about half needed for dye. To check the surface (Since bleach testing wont work), after sealant, use mother's aluminum polish. if anodized it will not blacken. On sealant I just use boiling water as most sealants have a tinge of green. Totally fresh water too as any residue dye can soak in and cause a cast of color.
    A few drops of blue is a little trick I have found. In person (camera make it look yellowish)  the above part has a blue tinge. The eye sees blue in the spectrum as silver and this helps offset yellow and grey casting in the part.

Friday, February 26, 2016

New Website: Revolver Toys

We have opened a new website for some toys that we will be producing. This is geared at the executive end of the market with high quality cnc desktop toys. The website is in development and will be a very simple site.

Friday, February 5, 2016

Anodizing Tips: Calling in the Store for Advise

      I've been getting too many calls into the store for setup on anodizing. There's a few issues that I almost always encounter. I placed these below and some rules to the process. Anodizing is really complex and too much time can be wasted. I'm very busy and the long phone calls isn't my thing.
1. Almost nobody has read the setup and tips I post on the blog before calling.
2. Almost everyone tells me what they read somewhere else, often times these things make no sense. Many forum people have no experience or will intentionally advise wrongly in order to deter future anodizers. I already know how to anodize so informing me of what you have heard doesn't mean much to me.
3. I will always ask the following so please know this: Volts, Amps, Tank temperature, Acid ratio, Time, Part Size, Type of aluminum (if you know...not all alloy is the same). I will also ask what you have purchased from the www.anodizeworld.com website. I reserve advise for paying customers only. I cannot help if you have no info on your setup...know the above!
4. Please have a pencil and paper so if I advise you on the phone you remember and don't need to keep calling back asking the same questions.
5. If you like to do a way other than I advise then I cannot help. Arguing with me on the phone is not good.
6. I cannot spend an hour micro-detailing the process.
    Rookie Problems:
#1 Not reading what I have posted / Ignoring what you have read.
#2 Acid is way too strong in ratio
#3 Using constant amps
#4 Way over complicating the process / Overthinking
#5 Lack of patience
#6 Arguing with experienced people.